Publicidad
Idiomas disponibles
Idiomas disponibles
when performing an operation
where the cutting accessory
may contact hidden wiring or
its own cord. Cutting accessory
contacting a "live" wire may
make exposed metal parts of the
power tool " live"and could give
the operator an electric shock.
b) Use clamps or another
practical way to secure and
support the workpiece to a
stable platform. Holding the
workpiece by hand or against
your body leaves it unstable and
may lead to loss of control.
c) Keep hands away from
moving parts. Never place your
hands near the cutting area.
d) Use extra caution when
cutting overhead and pay
particular attention to
overhead wires which may be
hidden from view. Anticipate
the path of falling branches and
debris ahead of time.
e) Do not operate this tool for
long periods of time.Vibration
caused by the operating
action of this tool may cause
permanent injury to fingers,
hands, and arms. Use gloves
to provide extra cushion, take
frequent rest periods, and limit
daily time of use.
WWW.SENIXTOOLS.COM
f) Avoid prolonged contact with
dust from power sanding,
sawing, grinding, drilling, and
other construction activities.
Wear protective clothing and
wash exposed areas with
soap and water. Allowing dust
to get into your mouth, eyes,
or lay on the skin may promote
absorption of harmful chemicals.
g) Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
h) Do not lay the tool down until
it has come to a complete
stop. Moving parts can grab the
surface and pull the tool out of
your control.
i) When using a handheld power
tool, maintain a firm grip on
the tool with both hands to
resist starting torque.
j) Do not leave the tool
unattended when the Battery
Pack is connected. Turn off
the tool, and remove the Battery
Pack before leaving.
k) This product is not a toy. Keep
it out of reach of children.
SAFETY WARNING FOR BATTERY
PACK AND BATTERY CHARGER
• Recharge only with the charger
specified by the manufacturer. A
7 - EN
Publicidad
