essentiel b ESLHP10-2b Instrucciones De Uso página 53

10. DESCRIBING THE
ENERGY LABEL AND
SAVING ENERGY
Energy Labelling
1. Trademark
2. Model
3. Energy Class
4. Annual Power Consumption
5. Noise During Drying
6. Dry Laundry Capacity
7. Cotton Cupboard Dry Cycle Time
8. Condensing Efficiency Class
9. Machine Technology
Energy Efficiency
You should operate the dryer to full

capacity, but make sure that it is not
overloaded.
When the laundry is being washed, the

spin speed should be at the highest level
possible. This will shorten the drying time
and reduce energy consumption.
Make sure that the same kinds of laundry

are dried together.
 Please follow the recommendations in the
user manual for programme selection.
For air circulation, leave an appropriate

clearance on the front and back sides of
the dryer. Do not cover the grills on the
front side of the machine.
Unless necessary, do not open the door

of the machine when drying. If you have
to open it, do not keep it open for a long
time.
Do not add new (wet) laundry during the

drying process.
 Hairs and lint that detach from the laundry
and merge in the air are collected by the
"Lint Filters". Please make sure that the
filters are cleaned before and after each
use.
For models with a heat pump, make sure

that the heat exchanger is cleaned at
least once a month or after each 30 uses.
During the

environment where the dryer is installed
must be well ventilated.
53
drying process, the