Whispbar K671W Instrucciones De Montaje página 11

EN
Fitting Kit
K671W
Select coach bolt and insert through metal
clamp slot.
Using the 10mm (3/8") spanner supplied
with the crossbars, tighten the nut to 5Nm
(3.7 ft lb) hand tight.
A = Coach bolt
B = Washer
C = Nut
Assemble as shown.
Refer to the underside of the pad for the
part number.
Fit rubber pads (supplied with fitting kit) to
foot. Pad may vary in shape to that shown.
11