Volvo Penta EVC-C Instrucciones De Montaje página 10

Secondary helm station
1. Connect the Throttle signal (IN) at main helm
in serial with the secondary station interface
Throttle signal (IN).
2. Otherwise requirements are the same as for
the main helm station (except throttle connec-
tions).
Main helm
- Negative
+ 10-28 VDC
NEUTRAL SWITCH
"OPEN" IN NEUTRAL
+ -
THROTTLE IN
4-20 mA
Secondary helm
(+) 10-28 VDC
NOTE!
If a manual/mechanical emer-
gency gear control on gearbox
is installed (type as TD). The
"neutral switch" for "crank
disable" function shall also be
installed. ("open" in neutral).
- Negative
+ 10-28 VDC
(+) 10-28 VDC