Descargar Imprimir esta página

Samsung HW-T450 Manual De Instrucciones página 20

Ocultar thumbs Ver también para HW-T450:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

07 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
Bluetooth device
The initial connection
1. Press the
PAIR button on the remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if
there is a connect record.
b. When "BT READY" appears, press and hold the
Soundbar for more than 5 seconds to display "BT PAIRING".
2. On your device, select "[AV] Samsung Soundbar T4-Series" from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → "BT"
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar T4-Series") appears in the
list, delete it.
• Then repeat steps 1 and 2.
NOTE
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY"
mode to reconnect.
(Source) button on the top panel and then select "BT".
(Source) button on the top panel of the
ENG - 16
OR

Publicidad

loading