Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the battery pack before you do maintenance.
Battery safety
Only use battery packs from the manufacturer and only
charge them in a battery charger from the manufacturer.
The rechargeable battery packs are only used as a
power supply for related cordless products. To prevent
injury, the battery pack must not be used as a power
source for other devices.
•
Do not disassemble, open or shred battery pack.
•
Do not keep battery packs in open sunlight or heat.
Keep battery packs away from fire.
•
Regularly examine the battery pack charger and the
battery pack for damage. Damaged or changed
battery packs can cause a fire, explosion or risk of
injury. Do not repair or open damaged battery packs.
•
Do not use a battery pack or product that is
defective, changed or damaged.
•
Do not change or repair products or the battery pack.
Only let your approved dealer do repairs.
•
Do not short circuit a cell or battery pack. Do not
save battery packs in a box or drawer where they
can be short circuited by other metal objects.
•
Do not remove a battery pack from its initial package
until necessary for operation.
•
Do not mechanically shock battery packs.
•
If there is a battery leak, do not let the liquid touch
the skin or eyes. If you have touched the liquid,
clean the area with a large quantity of water and get
medical aid.
WARNING: Read the safety chapter before
you assemble the product.
To assemble the blower tube
WARNING: Read and understand the safety
chapter before you operate the product.
406 - 002 - 20.11.2017
•
Do not use a battery charger other than what is
specified for operation with the battery pack.
•
Look at the plus (+) and minus (-) marks on the
battery pack and product to make sure of correct
operation.
•
Do not use a battery pack not made for operation
with the product.
•
Do not mix battery packs of a different voltage or
manufacturer in a device.
•
Keep battery packs away from children.
•
Always purchase the correct battery packs for the
product.
•
Keep batteries clean and dry.
•
Clean the battery pack terminals with a clean dry
cloth if they become dirty.
•
Secondary battery packs must be charged before
use. Always use the correct battery charger and
refer to the manual for correct charging instructions.
•
Do not keep a battery pack on continuous charge
when not in operation.
•
Save the manual to refer to it in the future.
•
Only use the battery pack for its necessary
operation.
•
Remove the battery pack from the product when not
in operation.
•
Keep the battery pack away from paper clips, keys,
nails, screws, or other small metal objects while in
operation. This can make a connection between
terminals. Shorting the battery pack terminals
together can cause burns or a fire.
ASSEMBLY
1. Align the tab on the blower tube to the powerhead.
2. Connect the blower tube to the powerhead until you
hear a click. Make sure they are locked together.
3. Connect the nozzle to the blower tube until you hear
a click. Make sure they are locked together.
OPERATION
Before you start the product
•
Examine the product for missing, damaged, loose or
worn parts.
•
Examine the nuts, screws and bolts.
7
Publicidad
