Publicidad
Idiomas disponibles
Idiomas disponibles
Foot Rail sealing kit
RRAC082
INSTALL TIME: 5 Mins
'
Seal Your vehicle s roof
You will need:
4 mm Hex Key
If your Rack's Foot Rails have been mounted using a rivnut, well nut or plus nut and you wish to remove
the Rack and Foot Rails you will need to seal the mounting holes using the Foot Rail Sealing Kit.
Remove the Rack and foot Rails from the vehicle, taking care to store all fasteners in a safe place for
(
)
A
future use. Clean the area round each of the mounting points ensuring that is if free of any silicone. Place
a Cover Cap over each of the mounting points and secure using a M6 Flat Washer and M6 x 16 Button
Head Bolt as shown. Close Cap once secured to vehicle.
Congratulations, you have completed your installation. Take a step back and admire your work. Good Job!
1
REV_A00
Publicidad
