Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
CAUTION: Incorrect wire connection would damage this receiver.
1. Ceiling fan must be set at High speed by pulling the "Pull Switch" after installation.
2. For fans that are not drop rod style (i.e. Flush Mount styles) the appropriate conversion kit should
be used. The fan should be installed and hanging from the ceiling.
3. Make the wiring connection as shown in Fig.1.1 IR senor must be stuck outside canopy.
4. Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The
canopy comes up to cover the receiver and bracket.
5. To change the batteries is to open the battery housing cover by sliding out the cover downward
to the arrow shown direction while pressing down the cover with thumb.(1.5V/AA.2pcs) holder
for transmitter
DISPOSAL
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
Publicidad
