Samsung HW-K650 Manual De Instrucciones página 18

CONNECTIONS
ConnECTInG To A TV
● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
COnneCting tO a tV USing a DigitaL OPtiCaL CaBLe
1. Connect the DigitaL aUDiO in (OPtiCaL) jack on the Soundbar to the oPTICAL oUT jack of the TV with a
digital optical cable.
2. Press the button on the right side of the Soundbar or the SOUrCe button on the remote control to select
the D.in mode.
+ auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function on
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the button on the main unit's right side or the SOUrCe button on the remote control to select the
D.in mode.
3. Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.
● Auto Power Link is set to on by default.
● Depending on the connected device, Auto Power Link may not function.
Optical Cable
OPTICAL OUT DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
HDMI IN
DIGITAL AUDIO IN
(OPTICAL) DC 24V
USB (5V 0.5A) HDMI OUT
Wi-Fi SETUP SPK ADD (TV-ARC)
AUX IN
18