Publicidad
Idiomas disponibles
Idiomas disponibles
3. Clean the rolling brush with the supplied cleaning tool.
4. To reinstall the rolling brush, insert the end of the rolling brush into one
side of the head, then fix the pin of the rolling brush into the hole on the
other side of the head. Make sure the rolling brush is installed properly,
otherwise it may be damaged during use.
5. Reinstall the rolling brush cover.
4
18 EN
click
5
Self-Cleaning and Self-Drying
1. After cleaning, place the vacuum onto the charging base.
2. Make sure the battery level is high and there is enough water in the
clean water tank.
3. Press the self-cleaning button. The vacuum will start self-cleaning and
will self-dry automatically. It will take a while and you will hear a voice
prompt when the self-drying is complete.
1
Self-cleaning
3
2
Self-drying
4
EN 19
Publicidad
