Publicidad
Idiomas disponibles
Idiomas disponibles
Safety and Handling
WARNING
Do not operate the pole saw attachment before reading all
Safety and Handling sections.
• Stay alert. Watch what you are doing when operating
a power tool. Do not operate the pole saw under the
influence of alcohol, drugs or medication or when you
are tired or sick.
• Do not operate the pole saw for any other purpose
except that for which it is intended.
• Use only manufacturer's genuine recommended
replacement parts and accessories.
Before using the pole saw
• The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in
severe eye damage. Always wear safety glasses with side
shield and a helmet. Always wear nonslip safety shoes,
ear muffs and gloves.
• Know the pole saw controls and learn how to stop
operating the unit quickly in an emergency by releasing
the "ON / OFF" switch.
• Before using the pole saw, make sure that the blade
assembly is not worn or damaged.
• Dress properly. Do not wear loose clothing or jewelry or
long hair which can be caught in moving parts.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools can create sparks which may ignite
the dust or fumes.
• Operate only in daylight or good artificial light. Never
operate in bad weather, especially when there is a risk
of lightning.
• Keep your work area clean and well lit.
WARNING
• Maintain 50 ft (15 m) between the unit and any electrical
line to reduce the risk of electrocution.
• Electricity can jump from one pole to another by arching.
Higher voltage increases the distance that causes
electricity to arc.
WARNING
Bystanders must be kept at least 50 ft (15 m) away from
cutting head during operation.
• Stop the machine immediatedly if approached.
• Be careful when turning or swinging the unit.
• Look before turning or changing direction.
Operating the pole saw
• Walk with the pole saw. Never run.
• To maintain full control of the pole saw, keep a proper
footing at all times with your weight evenly balanced
over both feet and never over reach. Use both hands
when operating the pole saw.
• Always keep the handle dry and free from oil and
grease.
• Always make sure the camlock is secure before
operating the pole saw.
• Do not force the pole saw. Always use the correct tool
for your application.
• Do not use the pole saw if the switch does not turn it ON
and OFF.
• Store idle power tools out of the reach of children.
Do not allow persons unfamilar with the power tool or
these instructions to operate the power tool.
WARNING
• Do not remove trimmed material or hold material to be
trimmed when the chain blades are moving.
• Keep all body parts, especially hands away from moving
parts when the pole saw is running.
• Always stop the pole saw and remove the battery if the
following conditions apply:
- before clearing any blockage.
- before assemblying, checking, cleaning or working on
the unit.
- whenever leaving the pole saw unattended.
- If the unit becomes jammed.
en
3
Publicidad
