corresponding device A or device B status on the Ronin 4D ultra-bright main monitor will display
connected.
Audience Mode
1. Enable Broadcast Mode in Image Transmission Settings in the Ronin 4D ultra-bright main
monitor.
2. Power on the ultra-bright remote monitor. Tap
Connection Settings. Tap Audience Mode and the monitor will automatically search for the
devices nearby. Tap the device you want to monitor and its live view will be displayed. Tap the
corresponding buttons on the right of the live view to refresh display or switch between devices.
Touchscreen Interface
The interface varies for control mode and audience mode. The following description is the
interfece introduction for control mode. In audience mode, control related operations such as
shooting parameters adjustment, force mobile, and LUT switch cannot be performed.
1.
Battery Level and External Power Voltage
2.
Remote Control Devices
To display the connected remote control devices such as three-channel follow focus, hand
grips, and master wheels.
3.
HDMI Input Devices
4.
Video Downlink Signal Strength and Bitrate
5.
Shooting Parameters*
Includes white balance, ND, angle of aperture/shutter speed (one of the two displayed by
following the setting in the Ronin 4D), aperture and EI. Tap to adjust the corresponding
parameter.
6.
Screen Lock
to enter System Settings and then