Baby Trend TS13D Serie Manual De Instrucciones página 6

Idiomas disponibles

Get the cross bar through the

rear wheel and insert the

second washer (Fig. 3c).

Place the pin horizontally into the

hole of the axle bar and then rotate

into a vertical position (Fig. 3d).

(1)

holes on the wheels.

cap into the wheel to close the axle

assembly.

NOTE: Press firmly with your palm to

press the cap in completely (Fig. 3e).

Repeat for the other side.

Place the rear legs over the axle with

Fig. 3c

wheels and apply downward pressure

on both sides. Ensure both sides lock

into place (Fig. 3f).

NOTE: Pull on the front and rear wheels

to ensure all are securely attached to

the stroller. NEVER use stroller if wheels

do not lock into place. If you need

assistance, please contact our customer

service department at 1-800-328-7363,

Monday-Friday, between 8:00 a.m. and

4:30 p.m. PST. www.babytrend.com/

contact-us

Fig. 3d

Align the tabs on the cap with the

(2)

Push the

Fig. 3f

Align

Fig. 3e

"Click"

Sonar