WARNING
Loads may disengage from clamp if proper
„
procedures are not followed.
A falling load may cause serious injury or death.
„
The clamp shall not be loaded in excess of its
„
rated load or handle any load for which it is not
designed. Read instructions in user manual to
determine minimum load permitted and
proper load thickness.
Never operate a damaged or malfunctioning
„
clamp, or a clamp with missing parts.
Clamp not to be used for personnel hoisting.
„
Prohibition of handling above persons.
„
Do not leave suspended loads unattended.
„
Operator and other personnel shall stay clear
„
of the load.
Do not lift loads higher than necessary.
„
Do not make alterations or modifications to clamp.
„
Do not remove or obscure warning labels.
„
See ANSI/ASME B30.20 BELOW-THE-HOOK
„
LIFTING DEVICES for additional information.
Read, understand, and follow these instructions
„
and the product safety information in user manual
before using clamp.
WWW.THECROSBYGROUP.COM
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.