Publicidad
English
Specifications
• No driver needed.
• Connection:
• Wireless: 2.4G RF
• Wired: USB (Auto switch to wired mode when USB cable is connected)
• DPI (Dots per inch) settings:400/800/1600/3200 dpi
• Adjustable USB report rate:125/500/1000 Hz
• Connector: USB type-A on a PC; USB type-C on a device
• Buttons: 7 buttons
• Switch:1 (switch for power off and two receivers)
• Cable: USB type-A to USB type-C (2 meters/6.6 feet)
• Battery charging: approximately 2 hours
Changing DPI setting
Press the DPI switch (labeled
Adjusting USB report rate
Press the report rate switch (labeled
Changing the Lift Off Distance (LOD) of your mouse
You might want to change the LOD to work with your mouse pad properly.
Wireless mode: Power off the mouse first. Press and hold the following combination
keys together and power on the mouse at the same time.
Wired mode: Power off and disconnect the mouse first. Press and hold the following
combination keys together and re-connect the mouse at the same time.
• For a lower LOD: buttons
• For a medium LOD: buttons
• For a higher LOD: buttons
Changing click response time
You can change click response time as desired.
Wireless mode: Power off the mouse first. Press and hold the following key and
power on the mouse at the same time.
Wired mode: Power off and disconnect the mouse first. Press and hold the following
key and re-connect the mouse at the same time.
• Fast response time:
• Normal response time:
LED indicator on Enhanced Wireless Receiver
Solid white: In sleep mode
Dark white: In normal operation
Flashing amber: Weak signal. Move the mouse within the effective range to improve
signal strength .
6
) to switch to a desired DPI setting.
7
) to switch to a desired report rate setting.
4
+
1
5
+
1
4
+
1
+
4
5
2
Publicidad
