Glacier bay HD67269W-6001 Guía De Instalación Y Cuidado página 6

Installation (continued)
5
Installing the stopper and
horizontal rod
□
Before installation, unscrew the protective
cap (1) from the horizontal rod (N).
□
Insert the stopper (H) into the drain hole in the
sink.
□
Insert the horizontal rod (N) into the drain body
(L) and through the hole of the stopper (H) until
you hear a click. See insert 2. You can press the
two sides of the joint (M) to remove the
horizontal rod (N).
NOTE: For easier removal and cleaning, rotate the stopper
(H) 90 degrees so that the horizontal rod (N) does not go
through the hole in the stopper (H). See insert 3.
N
1
Insert 3
L
H
2
L
Insert 2
N
M
M
6
Installing the lift rod
□
Push the lift rod (Q) through the hole in the
bottom of the faucet (A), then reattach the lift
rod knob (B).
□
Slide the lift rod (Q) down into the lift rod
strap (O) until it clicks into the lift rod strap (O).
NOTE: If a shorter lift rod (Q) is required for your
installation, you may call Glacier Bay Customer Service
for assistance.
A
1
Q
O
6
2
2
B
Q
Q
3
Q
O
B