Publicidad
Idiomas disponibles
Idiomas disponibles
READ AND FOLLOW ALL INSTRUCTIONS
WHEN SERVICING USE ONLY IDENTICAL QUIK DRIVE
ATTENTION - Please see screwgun manufacturer's instructions for safe use of electric power tools.
CHANGING NON-SKID TEETH On models with removable non-skid teeth, the nibs can
be reversed to protect some surfaces. (1) Insert a screw in the hole at top of nosepiece
and pry the nibs off. Replace by sliding onto front of nosepiece (2) and pressing against
a hard surface (3a - 3b).
1
2
Quik Drive
PRO Attachments and Systems
®
are covered by one or more of the following patents.
6425306, 6439085, 6601480, 6941847
LIMITED LIFETIME WARRANTY
This Limited Lifetime Warranty applies to all Simpson Strong-Tie Quik Drive products and must be read in conjunction with the General Notes, Terms
and Conditions of Sale, and Corrosion Resistance information contained in the current Quik Drive Auto-Feed Screw Driving System catalog and at
www.strongtie.com/info, along with any information provided with a Simpson Strong-Tie product. Screwdriver motors and batteries that may be
supplied with the Products are manufactured by others and are warrantied by their respective manufacturers. Simpson Strong-Tie Company Inc.,
hereinafter ("Simpson Strong-Tie"), warrants the Products to the original purchaser to be free from substantial defects in material, manufacturing,
and design for the lifetime of the product, if properly stored, maintained and used. This Warranty does not cover normal wear and tear or any
Product that was: (1) purchased other than from an authorized Simpson Strong-Tie dealer, retailer or distributor; (2) modified or altered; (3) used
with any fasteners other than authentic Quik Drive
accordance with the printed materials provided with the Product as determined by Simpson Strong-Tie. Purchaser's sole remedies are replacement
or repair upon return to Simpson Strong-Tie with proof of purchase (shipping prepaid by purchaser). To obtain warranty service go to www.strongtie.
com or contact Simpson promptly at (800) 999-5099. The repaired or replaced Product is warranted under the terms of this Warranty.
WHERE LAWFUL, SIMPSON STRONG-TIE DISCLAIMS ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL SIMPSON BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR SPECIAL DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED TO PROPERTY DAMAGE AND
PERSONAL INJURY. ENTIRE LIABILITY OF SIMPSON STRONG-TIE IS LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO
NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
REPLACEMENT PARTS.
®
3a
fasteners; (4) improperly serviced; or (5) subject to negligence, excessive uses, or any use not in
®
800-999-5099
CHANGING THE HEX MANDREL On QDPROHX14,
QDPROHX516, and QDPROHX516XL models, the
mandrel must be removed from the front nose.
(1) Remove retaining clip and washer (2) Slide
mandrel through front.
3b
1
strongtie.com
2
Publicidad
