Whispbar Q Serie Instrucciones De Montaje página 4

EN
Q-Series Tracks
Q1-Q10
Carefully select position on vehicle roof
making sure that your crossbar lengths will
match selected positions for the tracks.
Apply long lengths of masking tape to
vehicle roof in both positions.
Repeat for all four positions.
Make sure there is no interference between
what you intend to carry with aerials,
sunroof or tailgate.
Tracks can be fitted either parallel or
tapered to match vehicle roof shape.
Parallel Tracks:
A1 & A2 are equal
B1 & B2 are equal
C1 & C2 are equal
D1 & D2 are equal
Tapered Tracks:
A1 & A2 are different
B1 & B2 are equal
C1 & С2 are equal
D1 & D2 are equal
With help from another person, carefully lay
tracks over the masking tape and mark
rivet hole positions with a pencil or pen.
Take care not to move the tracks until the
holes are marked out.
4