Reelcraft D83000 OLP118 Instrucciones De Operación

Operating Instructions
Series D80000 Spring Driven Hose Reels
Low Pressure Model Numbers:
D83000 OLP118 D84050 OLP118
D83075 OLP118 FD83000 OLP118
D84000 OLP118 FD83075 OLP118
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
D
Personal Safety
Personal injury and/or equipment damage
may result if proper safety precautions are
not observed.
• Ensure that reel is properly installed
before connecting input and output
hoses.
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line,
ensure that pressure does not exceed
maximum working pressure rating of
reel.
Reelcraft International Inc. • Ph: +44 (0) 1536 406999 • Fax: +44 (0) 1536 406777
Unit 17 - Cronin Courtyard, Weldon South Industrial Estate, Corby - Northamptonshire NN18 8AG
europe@reelcraft.com • www.reelcraft.com/europe
FD84000 OLP118
FD84050 OLP118
Dimensional Data
Part #
B
D83000 OLP
D83075 OLP
D84000 OLP
A
D84050 OLP
FD83000 OLP 645 mm
FD83075 OLP 645 mm
C
FD84000 OLP 645 mm
E
F
FD84035 OLP 645 mm
FD84050 OLP 645 mm
ORIGINAL INSTRUCTIONS
• Remember, even low pressure is very
dangerous and can cause personal in-
jury or death.
• Be aware of machinery and personnel
in work area.
• If a leak occurs in the hose or reel, re-
move system pressure immediately.
• A high tension spring assembly is con-
tained within the reel. Exercise extreme
caution.
A B C
645 mm 610 mm 267 mm
645 mm 610 mm 267 mm
645 mm 610 mm 267 mm
645 mm 610 mm 267 mm
610 mm 267 mm
610 mm 267 mm
610 mm 267 mm
610 mm 267 mm
610 mm 267 mm
Noise is less than 70 dB(A)
D E F
200 mm 330 mm 264 mm
200 mm 330 mm 264 mm
200 mm 400 mm 264 mm
200 mm 400 mm 264 mm
200 mm 330 mm 264 mm
200 mm 330 mm 264 mm
200 mm 400 mm 264 mm
200 mm 400 mm 264 mm
200 mm 400 mm 264 mm
• Pull hose from reel by grasping the
hose itself, not the control valve.
• If reel ceases to unwind or rewind,
remove system pressure immediately.
Do not pull or jerk on hose!
• Treat and respect the hose reel as any
other piece of machinery, observing all
common safety practices.
Form# R998-1099 Rev: 12/2019