9.2 DV If the cursor is at
Click
to take picture.
Click
to set the color effect or restore to default settings.
Click
to select back or front camera.
10. Connect with external device
10.1. Connect with PC
Connect the device with the PC via the USB cable. The PC appears two new disk
symbols after connected successfully. One is the TF card, and the other is the
built-in flash.
10.2. Use of OTG and USB host
It supports the movable device with FAT32 format, such as U disk and MP3.
Connect the movable device to the MID. (Note: only OTG could support USB mouse
and keyboard, USB HOST only support USB2.0 High speed device)
position, the device is at DV mode.
19