Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning instructions
To ensure optimal performance of the system, cleaning has to be carried out at regular intervals.
Consult an authorised dealer.
• Disconnect the power supply before cleaning.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH7) or neutral household detergent.
• Do not use water hotter than 40 °C.
Indoor unit
• Do not splash water directly.
Wipe the unit gently with a soft
dry cloth.
2
0.2
1
3
Water pressure gauge
0.1
0.3
0.4
MPa
bar
4
Do not press or hit the glass cover using hard
•
and sharp objects. Failure to do so may cause
damage to the unit.
Ensure that the water pressure is between 0.05
•
and 0.3 MPa (0.1 MPa = 1 bar).
In case the water pressure is out of the above
•
range, consult an authorised dealer.
Inspection
• In order to ensure optimal performance of the units,
seasonal inspections on the units, water fi lter and fi eld
wiring have to be carried out at regular intervals. Consult
an authorised dealer regarding maintenance.
• Clear any obstruction on the air inlet and outlet vents of
the outdoor unit.
For extended non-use
• Disconnect the power supply.
24
Water fi lter
• Clean the water fi lter at least once a year.
Failure to do so may cause the fi lter to clog up,
which may lead to system breakdown. Consult
an authorised dealer.
Outdoor unit
• Do not obstruct the air inlet and outlet vents.
Failure to do so may result in low performance
or system breakdown. Remove any obstruction
to assure the ventilation.
• When it snows, clean and remove snow
around the outdoor unit to prevent the air inlet
and outlet vents from being covered with snow.
Non serviceable criteria
Disconnect the power supply
then please consult an authorised dealer under the
following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the Remote
Controller.
• Water leaks from the indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes excessively warm.
Publicidad
