Descargar Imprimir esta página

Bosch TDN10 Serie Manual De Instrucciones página 7

Ocultar thumbs Ver también para TDN10 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
en
20. The Active Ironing Board must always be
used in a dry environment and must not
be used outdoors. It must always be set
up in a safe location on a level surface.
The height adjustment setting of the Active
Ironing Board must always be in the locked
position.
21. Do not move the ironing board while is in
use, nor adjust the height level, The steam
station or the iron might otherwise fall off
or the Active Ironing Board might close
down.
22. Only dry or damp cloth should be ironed.
Never wet ones.
23. With the aim of avoiding dangerous
situations, any work or repair that the
appliance may need, e.g. replacing a faulty
mains cable, must only be carried out by
qualified personnel from an Authorized
Technical Service Centre.
24. When the appliance is to be disposed of,
it should be rendered unusable (e.g. by
cutting off the cord and plug).
PREPARATION (B)
Stand the Active Ironing Board on a firm, level
surface.
Unwind the cord on the Active Ironing Board
and carefully move the frame forwards. The
Active Ironing Board folds out and can be set
to the required position. The Active Ironing
Board can then be tipped forward to stand on
the floor.
The Active Ironing Board has 6 height
adjustable positions (max. height is approx.
100cm) so that you can stand or sit to iron.
To adjust the height, take hold of the ironing
board with both hands. Lift the ironing board up
slightly and pull the lever with one hand.
(The ironing board has to be slightly raised
for safety reasons, i.e. to prevent the lever
from being activated accidentally.) Only when
you hear the ironing board lock into place is
it secure.
8
Steam station can be placed now on the rest.
If you are going to use a steam iron instead,
ensure that it is placed over the rubber
strips in the ironing rest (C).
- To ensure trouble-free ironing, the steam
station must be correctly positioned on the
iron rest in a horizontal position.
- Plug the mains plug of the Active Ironing
Board into a wall socket.
- Then plug the steam station/iron mains
plug into the socket, thus providing a power
supply to the steam station/iron. The Active
Ironing Board is ready for use.
Always check the washing/ironing instructions
which are to be found on the labels of your
garments and linens, as well as the advice and
regulations in the instructions for use which
came with your steam station and iron.
FUNCTIONS (D)
Suction function
Holds the fabric firmly on the board to prevent
creasing
Steam extraction
• Enables the steam to penetrate the fibres
better, thus saving time and improving ironing
results.
• Keeps the Active Ironing Table dry and
helps to dry fabrics even whilst they're being
ironed.
• Enables laundry items to cool off faster by
the throughput of air, thereby preserving the
fabric quality.
Should be switched on continuously when
ironing with steam, in order to remove excess
steam from the Active Ironing Table and from
inside the housing and prevent possible water
drops when storing the board.
Blower function
It provides crease-free ironing results with
delicate fabrics and items of clothing resting on
a cushion of air.

Publicidad

loading