Greencut CRB500 Manual De Instrucciones página 36

36
TECHNICAL DATA
Input voltage
Start of energy
Fuse
Frequency
Rated charging current
Load capacity
Maximum starting power
Load Voltage
Product weight
NOTE: GREENCUT reserves the right to modify the technical characteristics without prior notice.
BOX CONTENTS
1. Charger
2. Tweezers
3. Fuses
4. User's manual
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
PRODUCT USE
ATTENTION: During operation, place the battery charger in a stable position and ensure that the air flow
through the openings is not obstructed, ensuring sufficient ventilation.
BATTERY PREPARATION
ATTENTION: Before charging, check that the capacity of the battery (Ah) to be charged is not less
than that indicated on the battery charger data plate (Cmin). Follow the instructions carefully in the
order indicated.
CRB500
220V - 240V
280A
50A (x2)
50Hz
30A (12V), 40A (24V)
1 - 1,6kW
18kW
12V - 24V
14kg
1 2
4
3
ES FR IT EN i