Descargar Imprimir esta página

Greencut CRB500 Manual De Instrucciones página 40

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

40
The fuse must always be replaced with the power cord disconnected from the mains. Be careful when replacing the
ribbon fuse, if present, tighten the fixing nuts firmly.
MAINTENANCE
Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
Clean the positive and negative terminals of any rust deposits to ensure good contact of the clamps.
Avoid contacting the two clamps when the battery charger is connected to the mains. This will blow the fuse.
Store the charger in a cool, dry place.
It is not recommended to leave it in a vehicle in hot or cold conditions.
Make sure that no metal chips or shavings fall into the ventilation grilles during storage, as this can cause serious
injury when used again.
RECICLYING AND DISPOSING
Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources. Dispose of the device in an environmentally friendly manner. Do not
dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this
appliance to an approved recycling centre (green point).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.
GUARANTEE
GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.

Publicidad

loading

Este manual también es adecuado para:

1020002