Orion CO500 Manual Del Propietário página 4

Installation
The performance of the Cobalt coaxial speakers is directly proportional to the
quality of installation . Care taken during the installation process will be
rewarded with years of satisfying performance . If you are unsure about your
installation capabilities, please refer to your local authorized oRIon Dealer
for technical assistance . oRIon dealers are trained professionals dedicated
to obtaining the maximum performance out of your oRIon system .
If you decide to install this speaker system yourself, please read the entire
installation section before starting your installation .
Tools Of The Trade
listed are the majority of the tools required to perform the installation .
Having the proper tools will make the installation much easier . some of these
tools are required .
• marking pen
• wire crimpers
• volt-ohm meter (opt.)
• 1 / 8 " drill bit
• assorted tin snips
• Phillips screwdriver
• 4 3 / 4 " (120mm) hole saw (5"Coaxial installation)
• 5 1 / 2 " (140mm) hole saw (6" Coaxial installation)
What's In The Box
Included in this box are all the necessary mounting hardware and cables
for your basic installation . listed below is a detailed list of the components
included in this system package .
2
Quantity
1
1
2
2
• needle nose pliers
• electric drill
• wire strippers
• wire cutters
• hole saw arbor
Description
Installation and operation Manual
Mounting template
Cobalt Coaxial speakers
Grills (except for 5x7)
Mounting screws
© 2012 MD Audio Engineering—all rights