Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety InStrUCtIonS!
1.
READ these instructions.
2.
KEEP these instructions.
3.
HEED all warnings.
4.
FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6.
CLEAN ONLY with dry cloth.
7.
DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other appara-
tus (including amplifiers) that produce heat.
9.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.
ONLY USE attachments/accessories specified by the manufacturer.
12.
USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13.
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14.
REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15.
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
16.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord
plug from the AC receptacle.
17.
The mains plug of the power supply cord shall remain readily operable.
The exclamation point, within an equilateral triangle, is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
RISK OF ELECTRIC SHOCK.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or
moisture.
WARNING: No naked flame sources – such as candles – should be placed on the product.
Place the equipment near a main power supply outlet and make sure that you can easily access
the power breaker switch.
WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back
panel or included power supply of the product. Operation from other voltages other than those
indicated may cause irreversible damage to the product and void the products warranty. The use
of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages
in which the product was not designed to operate. If the product is equipped with a detachable
power cord, use only the type provided with your product or by your local distributor and/or
retailer. If you are unsure of the correct operational voltage, please contact your local distributor
and/or retailer.
poSItIonInG yoUr poWereD SUBWoofer
Energy powered subwoofers are designed to reproduce the deep bass and deliver
the impact that really makes your movies and music come alive. For optimum
performance, place your subwoofer in a corner of the room on the same wall
as your front channel speakers. Refer to Figure 1 for placement. Please note
that room placement can have a dramatic effect upon the performance of your
powered subwoofer. Corner placement, as suggested above, will increase the
C a U t I o n
DO NOT OPEN.
amount of bass output, while placing the subwoofer along the middle of a wall,
or out in the room will decrease the amount of bass output but many result in
tighter sounding bass. Experiment with a number of different placement options
and control settings to find the one that best suits your particular room and taste.
When choosing your subwoofer's location, keep in mind that you will need to con-
nect the subwoofer's built-in amplifier to an AC power outlet.
ConneCtInG yoUr poWereD SUBWoofer to yoUr eLeCtronICS
Controls and Optional Connections — Powered subwoofers can be hooked
up to the subwoofer output of your electronics via the RCA jack inputs on the
subwoofer's rear panel. Refer to Figure 2. This is prefered over the conventional
speaker wire connections. For more information on the controls mentioned in this
manual and on bass management, see your dealer or visit www.Energy.com.
"Line In" – This input is filtered by the built-in Low Pass (LP) crossover and is
designed as a general purpose input for the subwoofer.
Conventional Speaker Wire Connection — Using 16-gauge or larger speaker
wire, connect the RED "positive" (+) terminal of your amplifier's LEFT channel to
the RED "positive" (+) terminal of your subwoofer's LEFT channel input ("Speaker
In"). Connect the BLACK "negative" (–) terminal of your amplifier's LEFT chan-
nel to the BLACK "negative" (–) terminal of your subwoofer's LEFT channel input
("Speaker In"). Repeat this procedure for connecting your amplifier's RIGHT chan-
nel to your subwoofer's RIGHT channel input. Refer to Figure 2. Take care to make
sure that no bare wires from any of the connections touch any other terminals as
this could cause a short and damage your equipment.
"Low Pass (LP) Crossover" – The crossover allows the user to select the
upper-frequency cutoff of the subwoofer. The frequency is selectable from 40-
120Hz. Frequencies above the set level are filtered out, allowing you to blend the
subwoofer's output into your main speakers.
"Level" – The "Level" control serves as an overall volume control for the sub-
woofer. It is used to match the output level of the sub to your main speakers.
"Phase 0/180" – This control is used to acoustically match the subwoofer's
output to your main speakers. You want to select one of the two positions, either
0 or 180, in which your sub has more output at your listening position.
"Power Off/Auto/On" – "OFF/AUTO/ON" - Selecting "Auto" allows the sub
to turn on the audio amplification when it senses an audio input signal. It will
automatically turn off the audio amplification after 20 minutes if no signal input
is detected. The sub has an LED on the bottom of the front panel that indicates
the status of the auto function. The LED will light RED when the amplifier is in the
"Off" position or in the "Auto" position with no audio signal, and GREEN when the
amplifier is receiving a signal in the "Auto" position or when in the "On" position.
Care anD CLeanInG of yoUr poWereD SUBWoofer
The only thing you should ever need to do to your speakers is dust them oc-
casionally. Never apply any abrasive or solvent-based cleaner or any harsh deter-
gent. You can clean the grilles with the brush attachment of a vacuum cleaner.
Warranty—U.S. anD CanaDa onLy
The Warranty below is valid only for sales to consumers in the United States or
Canada.
Energy Speakers warrants this product to be free from defects in materials and
workmanship (subject to the terms set forth below) for a period of five (5) years from
the date of purchase. During the Warranty period, Energy will repair or replace (at
Energy's option) this product or any defective parts (excluding
Publicidad
