When synchronization is successful (this can take up to
15 minutes), the hands will move towards the correct time. If it
fails however, the hands will move towards the time that was
memorized.
Reset
Briefly press the reset button once.
All hands will move to the 12:00 position and the memory is
cleared. The clock will attempt to synchronize to the master clock.
Automatic Calibration
This movement will automatically correct the time at 1:00 when the
clock is running slow due to a low battery. Please replace the battery
for correct time measurement.
8.
Battery
Insert a new 1.5 V AA battery in the battery compartment in
accordance with the polarity markings inside the battery
compartment.
Warning: Do not puncture batteries or throw them in
fire as they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep
batteries away from children.
9.
Cleaning and Maintenance
Wipe the device regularly with a moist, lint-free cloth.
Do not use alcohol or solvents.
10. Technical Specifications
dimensions
dial ................................................................. Ø 35 cm
clock ......................................................... Ø 40 x 4 cm
weight ...............................................................± 1088 g
V. 03 – 09/11/2017
WC40D
6
©Velleman nv