Samsung LE40F7 Manual De Instrucciones página 15

Changing the Colour Tone
Adjusting the Color Tone with the Preferred Color Component
Resetting the Picture Settings to the Factory Defaults
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 12.
2. Press the or button to select "Colour Tone", then press the ENTER button.
3. Press the or button to select the desired colour tone setting.
Press the ENTER button.
4. Press the EXIT button to exit.
Cool2: Makes the colour temperature bluer
than "Cool1" menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
The adjusted values are stored according to the selected Picture mode.
You can adjust a picture's color tone with your preferred color component.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 12.
2. Press the or
button.
3. Press the or button to select a particular item.
Press the ENTER button.
4. Press the or button to decrease or increase the value of a particular
item. Press the ENTER button.
5. Press the EXIT button to exit.
R Contrast: Lightens or intensifies the red component of the border between objects and
the background.
G Contrast: Lightens or intensifies the green component of the border between objects
and the background.
B Contrast: Lightens or intensifies the blue component of the border between objects and
the background.
R Brightness: Adjusts the brightness of the red component for the entire screen.
G Brightness: Adjusts the brightness of the green component for the entire screen.
B Brightness: Adjusts the brightness of the blue component for the entire screen.
Reset: Resets all settings to the defaults.
You cannot select a "Colour Tone" in the "Colour Manager".
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 12.
2. Press the or button to select "Reset", then press the ENTER button.
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
English-13
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature
button to select "Colour Manager", then press the ENTER
redder than "Warm1" menu.