PNI House AHD47 Manual De Usuario página 3

EN
2. The image wavers
- check if the power voltage is stable
- check the monitor and other peripheral equipments
3. The background image changes continuously
- the fluorescent lamp's electromagnetic field causes color roll. This is normal phenomenon of the cameras.
- reduce the number of fluorescent lamps or increase the distance between the camera and the fluorescent
lamps.
4. The image is unstable
- check if the power voltage is stable
- check all connections
CAUTION!
- Do not try to open the case of the camera. If the camera doesn't work properly, please contact your supplier .
- Connect the power to the camera correctly. The power voltage, polarity and operating temperature must be
according to the camera's needs.
- If you are using the camera during a lightning storm please make sure the ground connection is done properly
or disconnect the camera from the power supply.
- For quality images the power and signal cables should not be very long.
- Do not direct the camera to the sun or other source of strong light, to avoid image sensor damage.
- Do not install the camera near a heating radiator or other heat source.
Note: For optimal results we recommend using this camera with the following DVR: PNI House H804, PNI
House H808, PNI House H816
3