Front Runner LASS028 Instrucciones De Montaje página 4

2 FIT AND SECURE
2.4
2
2.5
2.6
LASS028_REV_A02
12
7
13
12
11
10
LH = RH
6
5MM
8
13MM
4
Assemble the Legs (Item 12) to the Leg Mount
(Item 3) by using M8 x 20 Button Heads, M8
Sping Washers, M8 x 19 x 2SS Flat Washers
(Items 6, 7 & 8) and the Nut Plates (Items 2).
Loosely fit your Slimline II Rack by using
M8 x 25 Hex Bolts, M8 x 16 x 1.6SS Flat
Washers and M8 Nylocs (Items 10, 11, 13)
as shown.
You can use the same method for Load Bars.
Center the rack on the Legs before fully
tightening (LH = RH).
Finish of by placing M8 Nut Caps (Item 9)
over all M8 Nyloc Nuts.
Use the same method for Load Bars.
© 2020 FRONT RUNNER VEHICLE OUTFITTERS