Front Runner FANP001 Manual De Instrucciones página 3

2 FIT AND SECURE
2.1
2.2
2.3
FANP001_REV_A00
Before starting the fitment you need to
remove the front, middle and rear Ditch
Covers from the vehicle's roof using a
suitable flat screw driver.
Do this on both sides of the vehicle.
Remove the plastic two inserts with a
Philips screw driver.
Place 2 Spacers (Item 11) over each of
the holes where you have removed the
plastic inserts.
3 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
13mm