Accessmatic Pitbull 400 Manual De Usuario página 28

Gate Gate
Spring limit Spring limit switch switch
Spring limit Spring limit switch switch stop stop block block
Gear Gear rack rack
Output gear Output gear
Operation manual
In the event of a power failure use the key to unlock the lock and push the release bar down about 90 degrees to open and
close the door manually, use the release key as follows:
1) Insert the supplied key into the lock.
2) Turn the key and push the release bar down about 90 degrees to release the gear. (Note: Do not exceed 90 degrees, do
not use too much force, otherwise the release bar may be damaged.)
3) Open and close the door manually.
Note: If the door hits the mounting post and cannot be opened electrically, move the door a couple of inches by hand, so
you can unlock the door with the key, open and close the door manually.
Cable connection
Make sure the equipment is turned o before making any electrical connections.
Opening your life
Opening your life
Figure 4
1
M6×18 M6×18 M6×18 M6×18
www.accessmatic.com
PB400
Code:
Figure 5