How To Use - Ambiano HM925 Manual Del Usuario

How to use the stand mixer and hand held unit
1. When Assembling the Stand Mixer, take the hand held unit and align the 2 front
holes with the 2 protrusions on the top of the base. Press down gently until you
hear a click that indicates the hand held unit is secure. Try lifting the hand held
unit. If it does not move then it is secure. If it moves repeat the steps above. Push
the grey button on the side of the base to tilt the head back to receive the
attachments.
2. Please note the hand held unit can be used by itself without the base.
3. To remove the handheld unit, press and hold the release and tilt head button,
while holding the handle, move the handheld unit forward and then up.
4. Please note the beaters will be off center of the bowl.
5. Select the attachments that are appropriate for the food that is going to be
mixed.
6. Please note: The dough hooks are for mixing dough only and should not be used
for other items such as beating eggs, cake mixes, or cookies.
7. Please note that the beaters can be inserted in either hole but the dough hooks
should only be inserted one way. The dough hook that has the washer on it (see
image on prior page) must go in the larger of the 2 holes. If you put the dough
hooks in the wrong way they will not click into place. The Stand Mixer will operate
if the dough hooks are inserted incorrectly but you will not get proper kneading
action and you could risk ruining a recipe or damaging your mixer.
8. Make sure the speed button is on "O" before you plug the unit into a power
outlet.
9. Turn the speed button to the desired speed and the Stand Mixer will begin
working.
10. If you press the "Turbo" button it will increase the speed approximately 15%.
11. Do not stick knives, metal spoons, forks or other utensils into the bowl while it is
operating.
12. Use a rubber spatula to scrape down the sides of the bowl when needed.
13. Please note the bowl will not turn automatically, however it can be turned easily
manually.
14. It is recommended that you do not leave the Stand Mixer on for more than 5
minutes at a time. Turn the Stand Mixer off to scrape the sides before turning it
back on.
15. When kneading yeast dough the speed button should be set on 1 or 2.
16. When mixing is complete, turn the speed button to "0" and unplug the unit from
the power supply.
User instructions
9