Ameriwood HOME 4778339COM Instrucciones De Montaje página 11

STEP 4
3
A
end view
Position and insert the locking bolts (9) of left front leg (G) into edge holes of left panel (A) as shown.
Be sure both parts are positioned as shown. Place the hammer block on top of leg in each of the 2
locking bolt locations and give a firm strike to lock together. The locking bolt (9) will snap into the
locking sleeve (10).
IMPORTANT NOTICE: Once locked together, parts cannot be separated.
Note: A rubber mallet can be used in place of a hammer and hammer block.
ameriwoodhome.com
(x1)
Hammer Block
HOLES ON
THIS SURFACE
G
A
H
11
3