Descargar Imprimir esta página

LG WFSL1432EK Manual Del Propietário página 26

Ocultar thumbs Ver también para WFSL1432EK:

Publicidad

Idiomas disponibles

Idiomas disponibles

26
P
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
1
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is
suggested.
NOTE
If the washer is installed on a uneven, weak or tilted floor causing excessive vibration,
spin failure or "
It must be placed on a firm and level floor to prevent spin failure.
2
Check that the machine is level
Open the lid and look from above to see if it is
same as shown.
3
Leveling the machine
Lift the front of the washing machine and twist the
Adjustable Leg until the surface bubble is placed
in the center.
Installing the Anti-Rat Cover (optional). Insert the anti-rat cover to be firmly fixed from the back or
front of washing machine and screw it.
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical portable
outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
" error can happen to it.
BACK
more than 10 cm
more
than
2 cm
Top view of the machine
Bubble
Adjustable legs
SETTING SCREW (2 pieces)
ANTI-RAT COVER
more than
2 cm
Level indicator

Publicidad

loading