Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
Connect Exhaust Hose to the
4.
Window Panel
Place the Air Conditioner close to the window
ensuring there is at least 20" of clearance from the
wall and any other obstructions. Extend the hose so
that it reaches the Window Kit. Insert the Exhaust
Hose Adapter into the opening in the Window
Kit and slide it into the locking position. Ensure
that the hose runs straight to the window with no
excess extension. Use the small screw to attach the
exhaust hose assembly to the window sealing plate
assembly. Important: The Air Conditioner must be
vented to the outside. Do not use a longer hose or
extend the hose included with the Air Conditioner or
the unit will not cool properly and will overheat.
Vertical
Window
12
Horizontal
Window
35.4"
90cm
19.7"
50cm
COMPLETE INSTALLATION
5.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
A. Plug the power cord into a grounded 3
prong outlet.
B. Press the Reset button on the plug to
ensure the safety plug is providing power to
the Air Conditioner.
C. Allow 20" of clearance around the Air
Conditioner for proper air circulation
D. When removing the Air Conditioner, be sure
to remove the Window Kit.
49-5000439 Rev. 2
Publicidad
