Omega OM7560 Serie Manual Del Usuario página 6

OPERATING INSTRUCTIONS
BEFORE FIRST USE
Before using your Omega Blender for the first time, remove any packaging material
and promotional labels. Ensure the appliance is switched off at the power outlet and
the power cord is unplugged. Wash the lid, inner lid, Eastman Tritan™ Container and
blade assembly in warm, soapy water with a soft cloth. Rinse and dry thoroughly. Do
not place parts in the dishwasher (with the exception of the container, lid and inner
lid). The container lid and inner lid may be washed in the dishwasher. Ensure the blade
assembly has been removed from the container before placing the blender into the
dishwasher. The motor base can be wiped with a damp cloth. Dry thoroughly.
ASSEMBLING THE BLENDER
1. To assemble the Eastman Tritan™ Container, place the silicon seal onto the blade
assembly.
2. Insert the blade assembly into the container base.
3. Place the motor base on a flat, dry surface. Ensure that the motor base is switched
off and the power cord is unplugged. Turn the blender container upright and insert
on to the motor base.
4. Plug the power cord into a power outlet. The handle of the container can be
positioned to the left or right hand side of the appliance.
DISASSEMBLING THE BLENDER
1. Always ensure your Omega Blender is switched off. Then unplug the power cord.
2. Remove the container from the motor base by grasping the handle and lifting the
container in an upward direction. Remove the blade assembly by upturning the
container and twisting the blade removal clockwise, then lift upwards and away
from the base of the blender.
3. Remove the silicon seal from the blade assembly.
AUTOMATIC OVERLOAD PROTECTION
Your Omega motor is designed to protect itself from overheating. If the motor shuts OFF,
turn OFF the power switch for up to 45 minutes to reset. To reduce reset time unplug the
machine, remove the container and blow air into the center section.
POWERCORD
Your machine is equipped with a long power cord.
Store the unused portion neatly underneath.
BOTTOM VIEW/CORD WRAP
Plastic cord retainers hold the cord securely. There is no
need to unscrew the cord retainers to let out more cord.
They are flexible and return to position after the cord lifted out.
4