2.
Safety instructions
Read the instructions for use, follow them and keep them available
▶
for later reference.
2.1
Transport and assembly
Use only suitable lifting gear for transport to the installation location.
▶
Secure transport routes.
▶
▶
2.2
Intended use
A vice is a device for securing
▶
workpieces during processing.
Invalidation of warranty cover:
▶
The vice must be used only with its own spindle wrench.
When clamping the workpiece, the use of supplementary leverage
such as pipes is not permissible. If supplementary leverage is used
when clamping, this invalidates the warranty.
3.
Installation
3.1.
Tools and attachment materials required
In connection with the original Hoffmann mounting plate, 50 mm
▶
thick.
Tool / Material
Adjust guide:
Change interchangeable jaws:
Please pre-drill to suit the screws used.
Vice
For worktop thickness 50 mm:
Vice
For worktop thickness 50 mm:
Swivel base
Wear safety shoes and a hard hat.
www.hoffmann-group.com
100 /120
6 mm
5 mm
19 mm
2×size 12 mm
3×size 10 mm
140 / 160
8 mm
6 mm
24 mm
4×size 16 mm
3×size 12 mm
DE
EN
FR
IT
ES
13