Winston Porter ANDV3354 Instrucciones De Ensamblaje página 8

STEP 1
1. Attach magnet plate (F) to left door (5) by inserting 1 screw (J) through hole on magnet plate
(F), then tighten to left door (5).
2. Attach knob (G) to left door (5) by inserting 1 machine screw (H) through hole on left door
(5), then tighten to left door (5).
3. Repeat above steps to assemble magnet plate (F) and knob (G) to right door (4).
4. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
5. Insert 2 wood dowels (C) into wood dowel holes on top board (1).
6. Attach magnet (E) to top board (1) by inserting 2 screws (K) through holes on magnet (E),
then tighten to top board (1).
STEP 2
1. Attach 2 metal hinges (D) to right side panel (3) by inserting 4 screws (J) through holes on
metal hinges (D), then tighten to right side panel (3).
2. Screw 3 cam bolts (A) into cam bolt holes on right side panel (3).
3. Insert 7 wood dowels (C) into wood dowel holes on right side panel (3).
4. Repeat above steps for left side panel (2).