Publicidad
Idiomas disponibles
Idiomas disponibles
First Time Setup
The first time setup screen is displayed only when the TV is turned on for the first time, after
the power cord is inserted into a wall outlet.
(42"/50")
(55"/60"/65")
Turn the TV on with the POWER button
(TV)
or
Setup the following items
●
Select your language
●
Select your country
●
Select your viewing mode (Be sure to select "Home Use")
If you select "Store Demonstration" by mistake, confirmation screen
will be displayed.
To display the "Set viewing mode" screen again in order to select
"Home Use", perform one of the following actions:
• Press and hold down the rear POWER button for at least five
seconds.
• Unplug the power cord for 30 seconds and then plug it in again.
●
Configure Network connection
Follow the instructions on screen to complete the Network
connection.
●
ANT/Cable setup
Select and adjust the settings according to your ANT/Cable
environment. Select "Yes" on the confirmation screen to start
the scanning process. After scanning is complete, press OK to
continue.
●
Adjust the Clock
Select the clock mode and adjust other settings.
When "Auto" is selected, clock will be set automatically according
to Time zone and DST. The TV must be connected to the Internet to
use this feature.
●
Complete First time setup
Completion screen is displayed.
To watch TV via a Cable box, Satellite receiver, or any other source
(DVD, DVR, gaming device, etc.), press the INPUT button and select the
appropriate input.
(Remote)
19
Publicidad
