Publicidad
Idiomas disponibles
Idiomas disponibles
How to deregister the Magic Remote
Press the
/
(Home) at the same time, for five seconds,
(BACK)
to unpair the Magic Remote with your TV.
Pressing and holding the
/
button will let you cancel and re-
/
register Magic Remote at once.
(Home)
How to use Magic Remote
y Shake the Magic Remote slightly to the
right and left or press
/
(INPUT),
pointer appear on the screen. (In some TV
models, the pointer will appear when you
turn the Wheel button.)
y If the pointer has not been used for a
certain period of time or Magic Remote is
placed on a flat surface, then the pointer
will disappear.
y If the pointer does not move as you wish,
shake Magic Remote to the left and right.
The pointer will move to the center of the
screen.
y The Magic Remote depletes batteries
faster than a normal remote due to the
additional features.
Precautions to Take when Using the
Magic Remote
y Use the Magic remote within the maximum
y
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
y A communication failure may occur due to
y
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote.
y The Magic remote may be damaged or may
y
malfunction if it is dropped or receives a heavy
impact.
y Take care not to bump into nearby furniture or
y
other people when using the Magic remote.
y Manufacturer and installer cannot provide
y
service related to human safety as the applicable
wireless device has possibility of electric wave
interference.
y It is recommended that an Access Point (AP) be
y
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic remote
may not perform as expected due to frequency
interference.
14
/
(BACK) and
/
(EXIT to LIVE)
/
(Home),
buttons to make the
Licenses
Supported licenses may differ by model. For more
information about licenses, visit
(For LF6350, LF6450,
LF6400, LF6500, LF7200
series)
Open Source Software
Notice Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
opensource@lge.com
to
(3) years from the date on which you purchased the
product.
External Control Device
Setup
To obtain the external control device setup
information, please visit www.lg.com.
(Depending upon model)
www.lg.com.
(For LH5800, LF595B,
LF5900, LF5950 series)
http://opensource.lge.com
. This offer is valid for three
.
Publicidad
