Publicidad
Idiomas disponibles
Idiomas disponibles
4. Trouble shooting
You may try to solve the following simple problems by yourself. lf they
cannot be solved, please contact the after-sales department.
Failed
operation
Odor
Long-time
operation of
the compressor
Illuminating light
does not shine
The freezer door
can not be
properly closed
Loud noises
Transient
difficulty in
door opening
Freezer
enclosure heat
Condensation
Airflow sound
Buzz
Clatter
Whether the freezer is plugged and connected to
power;
Low voltage;
Wheter temperature control knob is in the work area;
Failure power or tripping circuit.
Odorous foods should closely wrapped;
Whether foods are rotten;
Whether the interior shall be cleaned.
It is normal that freezer operates for longer time in
summer when the ambient temperature is higher;
Do not put too much food in the freezer at one time;
Do not put foods until they are cooled;
Frequent opening of freezer door;
Thick frost layer (defrost is needed).
Whether the freezer is connected to power, whether
the light is damaged.
The freezer door is stuck by food packages;
Too much food;
Unbalanced freezer.
Whether the floor is flat, whether the placement of
freezer is stable;
Whether the freezer accesories are properly placed.
After refrigeration, there will be pressure difference
between the inside and outside of the freezer to
result in transient difficulty in door opening. This is a
normal physical phenomenon.
The freezer enclosure may emit heat during operation
specially in summer. This is caused by the radiation
of the condenser and it is a normal phenomenon.
Condensation on the exterior surface and door seals of
the freezer is normal when the ambient humidity is too
high. Just wipe the condensate with a dry towel.
Refrigerants circulating in the refrigerant lines will
produce eruption of sound and grunts which is normal
and does not affect the cooling effect.
Buzz will be generated by running compressor, specially
when starting up or shutting down. The solenoid valve
or electric switch valve will clatter, which is a nomal
phenomenon and does not affect the operation.
14
V.2
Publicidad
