Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. Take out the unit from the box and layout all the spare parts for easy assembly. Make sure all small items are
not left in packaging materials.
2. Attach the top trim to the top of the unit and secure it by tightening 2 screws. Make sure the right angle side
faces toward the front of the unit.
Align and attach two side trims to the sides of the fireplace unit. ldentify the right and the left and make sure
the right angle side is faces toward the front of the unit.
3. Carefully set the unit from the back of the mantel and center it in the opening.
Check the alignment and attach the unit to the mantel by inserting screws through the drilled holes on the
trim to the mantel.
NOTE: Do not attempt to install the unit from the front of the mantel. lt will not fit.
12
Publicidad
