Utilización del módulo de control de la mecedora
Utilisation du module de commande de la balançoire
Swing Timer Select Button and
Indicator
Botón e indicador de selección de
temporizador de la mecedora
Sélecteur et indicateur de minute-
rie de la balançoire
Low Battery Indicator red
Indicador de batería baja rojo
Indicateur de niveau de piles
faible rouge
Slide the Power Switch to power the swing.
EN
The Speed Selector provides 5 speed settings. To start the swing function, press
the button until the flashing LED displays the desired setting. Gently push the
seat to start the swing motion. When the speed setting is changed during swing
motion, the LED will flash during this speed adjustment.
Use the Swing Timer to turn OFF the swing automatically. Press the button to
select the desired timer setting of 30, 45, or 60 minutes. If a timer setting is not
chosen, the swing uses a default time of 90 minutes for auto-shutoff. To use the
swing function after shutoff, press the Speed Selector.
Press the Nature Sounds/Music Button to begin music and nature sounds
playback. Auto-shutoff occurs after about 20 minutes.
Push the Volume Control Switch as needed to turn off or adjust the volume for
music and nature sounds.
The Low Battery Detection function detects weak batteries and suspends
normal swing operation. The indicator turns ON (red) when you press a button
when the batteries are weak. To restore normal operation, replace all batteries.
Using the Swing Control Module
Speed Selector Button
and Indicator
Botón e indicador de
selección de velocidad
Bouton et indicateur du
sélecteur de vitesse
– 19 –
Power Switch
Interruptor de Encendido
Interrupteur de mise en
marche
Volume Control
Switch
Interruptor de control
de volumen
Commande volume
Nature Sounds/Music
Button
Botón de música/
sonidos de la
naturaleza
Bouton Sons de la
nature/Musique