Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Place the receiver into the top of the mounting bracket
with the flat side facing the ceiling. Tuck the receiver an-
tenna and all wiring up into the mounting bracket, making
sure the wires don't become pinched.
SLIDES IN FROM THIS DIRECTION
Slide the canopy up into place and rotate clockwise to lock
to mounting bracket assembly. Reinstall the two screws
(M4 x 6 mm) removed previously and tighten securely.
TOP VIEW
MOUNTING
BRACKET
CANOPY
ANTENNA
MOUNTING
BRACKET
RECEIVER
TOP
CANOPY
SCREWS
CANOPY
SCREWS
14 - English
Lift the screw cover ring up over the screws and twist
counterclockwise to secure in place.
SCREWS
SCREW
COVER RING
SCREWS
Publicidad
