Descargar Imprimir esta página

Steren AUT-200 Manual De Instrucciones página 4

Ocultar thumbs Ver también para AUT-200:

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Afterwards, the deactivated power circuit will activate.
5. In order to deactivate this function, press the "2" button or restart the
system.
AUDIBLE ZONE ALARM
This option allows you to know if someone or something has hit your car
during the time when the alarm was activated.
When you deactivate the alarm, it will sound three times if anything hit
your car.
ALARM MEMORY WHEN THERE HAS BEEN AN INTERRUPTION IN
POWER
When the car's battery is disconnected and connected again, the alarm
will immediately activate.
The siren will activate and the lights will blink. The deactivated power
circuit will also be unhabilitated.
Do not leave your car keys inside the vehicle if you are going to change
or disconnect your car battery.
INTRUSION ALARM
If the alarm sound more than two times when you disarm it, this means
that the vehicle has been subject to a breach such as it being hit, someone
trying to open the doors, or someone trying to turn the ignition switch.
If you hear three beeps: The shock sensor was activated
If you hear four beeps: The door circuit was activated
If you hear five beeps: The ignition switch circuit was activated
SELECTION OF: POWER – DOORS CLOSED/OFF – DOORS
OPEN
This option is defaulted to on/doors closed. This means that when you
turn your vehicle on, the doors will automatically lock and when the car is
turned off, the doors will automatically unlock. If you wish to deactivate
this function, press the "2" and "3" buttons at the same time while the car is
on. This way, only the off/doors open function will remain active.
CAR ON / DOORS CLOSED PRESSING THE BRAKE PEDAL
If the car on/doors closed function is deactivated, you can still easily get
the automatic door lock by pressing the car's brake pedal twice. For this
function to work, the additional white cable must be connected to the
brake.
EMERGENCY SWITCH
Turn your car on and press the hidden restart switch in order to disarm the
security system.
REMOTELY ACTIVATING THE PANIC ALARM
The alarm's siren can be activated from a range of 20-30 meters from the
car by pressing the "4" button on the transmitter for three seconds.
The siren will activate and the light will blink for 30 seconds. In order to
exit panic mode, press the "2" button.
DEACTIVATING THE SHOCK SENSOR
When the alarm is in armed mode, press the "1" and "2" buttons at the
same time in order to deactivate the shock sensor.
In order to reactivate the shock sensor, reenter armed mode.
All other sensors will remain active when you turn the shock sensor off.
LAST DOOR ACTIVATION
Once all the doors have been closed for 30 seconds and the ignition key is
not on the on position, the security system will automatically activate.
This option can be deactivated.
ENGLISH-03
OPENING THE TRUNK
Press the "2" and "3" buttons for three seconds. The alarm will deactivate
and the trunk will open (if the trunk is electronically configured).
VALET MODE
This mode will temporarily deactivate the alarm system. When valet mode
is activated, the "2" and "2" buttons will only control the central opening
and closure. The rest of the functions will be deactivated.
In order to activate valet mode, follow these steps:
1. With the ignition set to the off position, press the "1" and "2" buttons at
the same time for 2 seconds.
2. The siren will emit a beep and the lights and LED indicator lights will
blink.
3. If you wish to deactivate this mode, repeat steps 1 and 2.
OPEN ENTRY INDICATOR
If the LED indicator light is constantly on and the alarm is in disarmed
mode and the valet mode is off, the system is indicating that there is an
open entry.
If the lights blink when the ignition switch is in the on position, this also
means that there is an open entry.
OPEN DOOR INDICATOR
When the alarm is disarmed and the ignition switch is in the on position,
press the "3" button for two seconds, the siren will emit three beeps in
order to confirm that this function is activated.
When this function is activated, and any door is open, the lights will blink
ten times indicating that a door is open.
In order to deactivate this function, press the "3" button for two seconds.
This function is activated by default.
EMERGENCY MODE
While the ignition switch is in the off position, press the "4" button, the siren
will turn on and the lights will blink for 30 seconds.
In order to deactivate this mode, press the "2" button.
SPECIFICATIONS
Input: 12V - - -
Weight: 1,018 g
Product design and specifications are subject to change without
previous notice.
ENGLISH-04

Publicidad

loading