Bestron ACH1500R Manual Del Usuario página 17

instruction manual
before first use
Remove the ceramic heater from the packaging and remove all the packaging materials.
use
1. Place the ceramic heater on a stable surface and ensure that the grilles for the supply and removal of
the air are unobstructed.
Place the ceramic heater on a stable surface and ensure that the grilles for the supply and removal
of the air are unobstructed.
2. Insert the plug into the plug socket (8). The On/Off indicator light (1) will be lit.
3. Use the function button (3) to select one of the following functions:
0 Off
Cold air
I
Warm air (750Watt)
II Hot air (1500Watt)
4. Rotate the thermostat button (3) towards the right. A click will be heard to indicate that the appliance
has been turned on. The temperature is adjusted by turning the thermostat button further.
Please do not cover the appliance.
To find the ideal thermostat setting, rotate the thermostat dial clockwise as far as possible. Once the
room has reached the desired temperature, slowly rotate the dial anticlockwise until a click is heard.
The appliance will then turn itself off. The temperature regulator will ensure that the room remains at
the set temperature.
cleAning And MAintenAnce
1. Remove the plug from the wall socket and allow the appliance to cool.
2. Clean the exterior of the housing with a damp cloth and rub it dry with a clean cloth.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
• Do not use a metal scouring pad to clean the appliance. Fragments of metal could come loose and
touch the appliance's electrical parts causing it to short circuit.
tecHnicAl inforMAtion
Type: ACH1500R / ACH1500S
Output: 1500W
Power supply: 220 - 240V ~ 50Hz
guArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
17