NeuLog NUL-249 Manual De Instrucciones página 18

18
Home
NeuLog resistance logger sensor NUL-249
The NeuLog resistance sensor can be used for any
science experiment which utilizes resistance readings. It
is used in the fields of Physics, Electronics, Chemistry,
Biology, etc.
The sensor comes pre-calibrated so you can start
experimentation right out of the box using this guide.
Hundreds of possible experimental subjects that can be
performed with the NUL-249 sensor are: Electrical
components resistance measurements, electrical
parallel circuits, electrical series circuits and electronics.
The resistance sensor's measurement units are:
Ohm (Ω): The ratio between the voltage on and the
resistance through an electrical component.
V2018.01 English