Publicidad
Idiomas disponibles
Idiomas disponibles
20
Home
Technical background
The philosophy behind NeuLog's plug and play
technology is based on each sensor's ability to store its
own data due to an internal flash memory chip and
micro-controller in each plastic NeuLog body. This
technology allows the sensor to collect and then store
the digital data in the correct scientific units (for
o
o
example:
C,
F, Lux, %, ppm).
The sensor is pre-calibrated at the factory. The built-in
software in the logger can be upgraded for free at any
time using the provided firmware update.
The NeuLog resistance sensor drives current to the
tested resistance through a resistor in series. The sensor
measures the current through the resistance and the
voltage on it. Using ohm's law (R = V/I) the resistance is
calculated from the current and voltage values.
V2018.01
English
Publicidad
