Página 5
Spares Information T1047 Item Part No. Description Circlip Check Valve Flow Regulator O Ring VS-56043 CD Valve Clockwise Spout Extension O Ring O Ring Spout Set Screw VS-56044 CD Valve Anti-clockwise...
Página 6
Flow Rates T1047 FLOW RATE LITRES/MIN 110.0 88.0 66.0 44.0 22.0 T1047 FLOW RATE (US)GALLONS/PSI 25.0 20.0 15.0 10.0 14.5 29.0 43.5 58.0 72.5 The flow rate data provided in this document is indicative of each product and is given in an open outlet condition.
Página 7
Installation 1. Install the finished surface, ensuring the finished surface is in accordance with the minimum and maximum installation depths shown on the drawings in the front of this booklet. 2. Remove the thread covers (R). Important note: The instructions show the “LA” lever option, the assembly method and set up are the same for the “LB”, “R”, “CCR”...
Página 8
Installation 3. Ensure the supply to the installation system is isolated. 4. Remove side valve bungs (A) and spout outlet cap (B). Important note: The instructions show the “LA” lever option, the assembly method and set up are the same for the “LB”, “R”, “CCR” and “CBR” handle options...
Página 9
Installation 5. Screw CD valves (C) into the installation kit, ensuring that the left hand CD valve has the mark as shown. Ensure CD valves are fully tightened. 6. Push spindle adapters (D) onto CD valves (C) and secure using long screws (E). 7.
Página 10
‘LA’ lever fine adjustment 1. Remove screw (D) and spline adaptor (C), turning clockwise or anti-clockwise for fine adjustment. 2. Each rotation on the Ø11.90 spline teeth will alter the angle achievable when ‘LA’ lever assembly comes back into contact with the Ø7.60 spline. 3.
Página 12
5. Ceramic cartridges in hard water areas. To prolong the lifespan and reduce servicing periods of your Samuel Heath tap we recom- mend that a suitable water softener be fitted. Consult your installer/designer for details.